Category
Woodworking Machine Parts
Replacement parts and assemblies for European woodworking and panel-processing machinery, including CNC machining centers (nesting and point-to-point), beam and panel saws, edgebanders, throughfeed lines, and presses from HOMAG (including Weeke, Brandt, Holzma, and Bütfering), Hymmen, Kraft, Wemhöner, Bürkle, and Fletcher. From spindles, bearings, drive belts, and vacuum pumps to controls and wear parts, if it runs in a modern furniture, cabinet, flooring, or panel plant, we can source the part.
Manufacturers in This Category
Products
Biesse Edgebander Parts
Glue pots, pressure rollers, trimming and scraping units and feed chain parts for Biesse Stream and Akron edgebanders.
Details & quote
Biesse Machining Center Parts
Suction cups, pod seals, workholding and tool-changer parts for Biesse Rover and Skipper machining centers, sourced against the machine's own numbering.
Details & quote
Biesse Panel Saw Parts
Scoring components, pressure beam seals, gripper pads and air-cushion table parts for Biesse Selco beam saws.
Details & quote
Brandt Edgebander Parts
Glue pots, trimming and scraping units, feed chains and pressure rollers for Brandt edgebanders, with Homag cross-referencing where it applies.
Details & quote
Brandt Glue Pots
EVA and PUR glue pots for Brandt edgebanders, plus application rollers, heating elements and thermostats: the parts that decide edge adhesion.
Details & quote
Brandt Trimming Units
Profile cutters, spindle bearings, copying rollers and pneumatic actuators for Brandt flush and profile trimming units.
Details & quote
Bürkle Coating Machines
Bürkle coating machines apply liquid coatings to wood-based panels and decorative surfaces by roller, casting, or spray, and are commonly combined with UV curing.
Details & quote
Bürkle Laminating Lines
Bürkle laminating lines apply decorative and protective films to boards and substrates, integrating feeding, coating/adhesive, pressing, and stacking into a.
Details & quote
Bürkle Press Lines
Bürkle press lines cover short-cycle, multi-daylight, and specialty presses for wood-based panels as well as the high-precision multilayer press lines used in PCB.
Details & quote
Fletcher Cabinet Door Machines
Feed-through and CNC systems that produce cabinet doors with combined shaping, drilling, and routing.
Details & quote
Fletcher Contour Edgebanders
Edgebanding machines for straight and contoured edges with trimming, scoring, and foil-application options.
Details & quote
Fletcher Double-End Tenoners
Heavy-duty double-end tenoning machines for sizing, shaping, and profiling panel edges in high production.
Details & quote
Holzma Beam Saw Parts
Saw carriage components, pressure beam parts, pneumatic floaters and gripper clamps for Holzma beam saws, including long-discontinued machines.
Details & quote
Holzma Pressure Beam Parts
Cylinder seal kits, pneumatic valves and wear strips for Holzma pressure beams, where uneven clamping shows as dimensional drift.
Details & quote
Holzma Scoring Saw Units
Horizontal adjustment assemblies, spindle bearings and drive belts for Holzma scoring saw units, the parts that decide bottom-face edge quality.
Details & quote
Homag CNC Machines
HOMAG CNC machining centers (including the CENTATEQ / BMB / BHX families) rout, drill, and shape panels for furniture, cabinet, and joinery production.
Details & quote
Hymmen Coating Lines
Hymmen coating lines apply liquid and powder coatings with tight film-thickness control for durable, uniform surfaces.
Details & quote
Hymmen Laminating Lines
Hymmen laminating lines bond decorative and functional layers to substrates with precise temperature and pressure control, the backbone of modern surface production.
Details & quote
Hymmen Printing Lines
Hymmen industrial digital printing lines (including the JUPITER platform) print décor directly onto boards and continuous webs at production speed, enabling.
Details & quote
Kraft 5-Axle Milling Technology
Kraft 5-axis milling technology machines shaped and contoured wood and panel parts in a single setup, reaching complex geometries that fixed-axis machines cannot.
Details & quote
Kraft Assembly
Kraft assembly stations join and finish machined components into completed products within the production flow, such as door leaves or panel assemblies.
Details & quote
Kraft Conveyor Systems
Kraft conveyor systems move workpieces between processing stations at line speed, using chain, roller, and transfer technology matched to the material and cadence.
Details & quote
Kraft Doors & Frames
Kraft doors-and-frames machinery processes door leaves and frame components with the sizing, profiling, and machining that door production requires.
Details & quote
Kraft Double-End Tenoner
The Kraft double-end tenoner profiles both edges of a workpiece simultaneously for longitudinal and cross processing, sizing and shaping in a single pass.
Details & quote
Kraft Gantry Systems
Kraft gantry systems feed and transfer workpieces into and between stations, including tandem gantry feeding for high cycle rates.
Details & quote
Kraft Packaging
Kraft packaging stations stack, bundle, and package finished workpieces at the end of the line, protecting product and preparing it for shipment.
Details & quote
Kraft Production Lines
Kraft production lines interlink feeding, sawing, tenoning, milling, handling, storage, and packaging into a single coordinated system for high-volume output.
Details & quote
Kraft Storage
Kraft storage systems buffer and store workpieces and stock within the production flow, decoupling machine cycles so upstream and downstream stations run.
Details & quote
Kraft SynchroPress
The Kraft synchropress applies synchronized, controlled pressing within the production flow for joining, laminating, or forming operations that require even, timed.
Details & quote
Kuper Splicing Heads
Nozzles, thread guides, heating cartridges and tensioners for Kuper splicing heads, the assembly that lays the zigzag thread.
Details & quote
Kuper Veneer Splicer Parts
Thread guides and nozzles, heating elements, feed belts and pressure rollers for Kuper zigzag-thread veneer splicers.
Details & quote
Leuco Router Tooling
Leuco nesting, roughing, finishing and profile router tooling for CNC machining centers, plus the collets and holders that carry it.
Details & quote
Leuco Saw Blades
Leuco circular saw blades for panel sizing, scoring, cross-cutting and abrasive board, specified by geometry and material rather than diameter alone.
Details & quote
Leuco Scoring Sets
Leuco conical and adjustable two-part scoring sets, shimmed to match the main blade kerf so melamine stays chip-free.
Details & quote
SCM Edgebander Parts
Glue pots, application and pressure rollers, and trimming tooling for SCM Olimpic edgebanders.
Details & quote
SCM Panel Saw Parts
Scoring, clamping and pusher carriage parts for SCM Sigma beam saws, sourced against the machine's own part numbering.
Details & quote
SCM Sanding Line Parts
Contact and pressure rollers, sanding pads, belt tracking components and brush units for SCM and DMC sanding lines.
Details & quote
Vollmer Sharpening & Rotary Machinery
VOLLMER rotary sharpening machinery precision-grinds saw blades and rotary cutting tools, restoring geometry and edge quality to keep tooling cutting cleanly and.
Details & quote
Wemhöner Panel Press Lines
We support Wemhöner short-cycle and special press lines, the world-leading systems for laminating melamine-impregnated decor onto wood-based panels (MFC, LPM) and.
Details & quote
Wemhöner Woodworking Parts
We source spare and wear parts for Wemhöner surface-technology and press equipment, including press platens, seals, hydraulic and heating components, and.
Details & quoteNeed Woodworking Machine Parts?
Send us a part number, machine model, or a photo of the nameplate. We typically respond within one business day.