Bürkert
Bürkert Process Valves
Bürkert pneumatically and electromotively actuated globe, angle-seat and diaphragm valves with control heads and position feedback.
Need Bürkert Process Valves?
Send a part number or nameplate photo. We respond within one business day.
Request a QuoteBürkert process valves cover pneumatically and electromotively actuated globe, angle-seat and diaphragm valves, usually paired with a control head that carries position feedback and pilot solenoids in one unit.
Selection comes from the process, not the catalog: medium, line size, pressure and temperature set the valve, and the required fail position and control signal set the actuator and head. On hygienic duty the seal material and surface finish matter as much as the flow path.
Send the type number if you are replacing like for like, or the process conditions and control requirement, and we will quote the assembly.
Applications
- Hygienic and sanitary process lines
- Angle-seat and globe valve duty
- Diaphragm valves on aggressive media
- Control head and feedback retrofits
Bürkert Process Valves: Common Questions
Angle-seat valves suit high flow and frequent cycling, globe bodies suit throttling, and diaphragm valves suit aggressive or particulate media where the flow path must stay clean. Tell us the medium, line size and duty.
Yes, as an assembly with the valve or separately. Send the valve type plus the control signal and the fail position you need.
Seal material and surface finish as much as the flow path. The wrong elastomer will pass clean-in-place once and then harden.
Yes. We need the number of functions, the flow, the voltage and the network protocol the island has to speak.
