END-Armaturen
END-Armaturen Brewing Equipment
END-Armaturen doesn't sell a separate "brewing" product line.
Need END-Armaturen Brewing Equipment?
Send a part number or nameplate photo. We respond within one business day.
Request a QuoteEND-Armaturen doesn't sell a separate "brewing" product line. Breweries and beverage producers spec the same butterfly, check, and pressure-control valves used across END's general process range, in the hygienic materials and seal grades (stainless wetted parts, EPDM/FKM seals) that beverage service calls for.
If you're speccing valves for a brewery or beverage line, tell us the media (wort, CO2, cleaning fluid, finished product), size, and hygienic requirement and we'll match it to the right valve type from END's butterfly, check, and pressure-reducer families rather than a dedicated "brewing" SKU.
Specifications
| Valve types | Hygienic ball and shutoff valves, fittings |
|---|---|
| Body material | Stainless steel 1.4408 / 1.4404 |
| Seals | Food-grade EPDM and PTFE |
| Typical sizes | DN10–DN50 |
| Actuation | Manual and pneumatic |
Specifications are indicative and vary by model. We confirm exact specs on your quote.
Applications
- Wort and process-fluid transfer
- CIP (clean-in-place) circuits
- CO2 and pressure-control lines
- Hygienic on/off isolation
END-Armaturen Brewing Equipment: Common Questions
Yes. Ball and shutoff valves in DN10 to DN50 with PTFE or EPDM seals handle wort, water, CO2 and cleaning media, in stainless bodies of 1.4408 and 1.4404.
Stainless construction, food-grade seat material and a flow path that cleans out. On a brewery line the seal material and finish matter as much as the size.
EPDM handles steam and caustic well and dislikes oils, which suits most brewery CIP. Tell us both the product and the cleaning chemistry and we will confirm.
Yes, actuated and manual. Send the line size, medium, connection type and control signal.
More From END-Armaturen
Actuators
END-Armaturen actuators drive its butterfly and ball valve lines, with pneumatic part-turn actuators (in-house-developed and lower-cost economy lines) and electric.
Details & quote
Flanges
END-Armaturen's flange and fitting program covers the connection hardware around its valve line, including threaded, coupling, and hose fittings for pipework.
Details & quote
Position Indicators
END-Armaturen position indicators and limit switches report valve/actuator position back to a control system, with mechanical limit switches, SIL-rated switches for.
Details & quote