(704) 296-9600· Mon–Fri 8:00am–5:00pm ET info@protech-international.com
HAWE Hydraulik logo

HAWE Hydraulik

HAWE Hydraulik Hydraulic Systems

Mobile, high-pressure, servo, and mini HAWE power packs engineered to application.

HAWE Hydraulik Hydraulic Systems

Need HAWE Hydraulik Hydraulic Systems?

Send a part number or nameplate photo. We respond within one business day.

Request a Quote

HAWE compact hydraulic power packs integrate motor, pump, tank, and valves into a ready-to-use unit. HK units use an oil-immersed three-phase motor in an upright tank, available in single-, dual-, or triple-circuit configurations with configurable tank size, pump type, and motor power.

Types & Configurations

  • mobile
  • high-pressure
  • servo
  • mini

Specifications

Max operating pressureUp to 700 bar
Flow rate (HK)~6–24 L/min
Displacement (HK)~4.5–17 cm³/rev
Pump optionsRadial piston, external gear, internal gear
CircuitsSingle, dual, or triple circuit
DeliveryAssembled, oil-filled, tested

Specifications are indicative and vary by model. We confirm exact specs on your quote.

Applications

  • Clamping & machine-tool hydraulics
  • Lifting and positioning
  • Test benches
  • General industrial actuation

Example HAWE Hydraulik Hydraulic Systems Part Numbers We Source

A representative, non-comprehensive sample of HAWE Hydraulik Hydraulic Systems part numbers and type codes we source. Don't see yours? Send it over. We source the full catalog.

Part NumberDescription
2800 0006-01SWPA 04 DW/M-X 24
3065 4001-00Cap 5980 009
6800 2875-00Valve WG 3-3-WG 110
6800 9984-01Seal kit, NBR
6801 0458-11Seal kit, NBR, for V30E
6950 2357-00HRP 7 V-B 0,4
6951 0423-00Solenoid valve WG 22-3-WG 230-3/4
6954 7010-00VZP 1 G 22-G 24
6958 4369-00Pressure control valve AL 21 R F 3-D/120/180-2, 120-350 bar
6963 0563-66Accumulator AC 1002, pressure setting 80 bar
6963 0686-91VP 1 R-1/4-LM 24
6963 1180-61Hydraulic power pack HKF 489 DT/1-H 7,2 -UF 3 V1-AB 1 C 300-P/EM 21 S-X 24 -BA 2 -ZPL/MVEX 6 B/.../R -NBVP 16 G/R/A6E2B6E2/M/NZP 26 CZ 21 H/3 -NG
10016935INKA141V00, pressure setting 400 bar
69612799ooPump unit HKF 435/1
4766404700Level switch D, reversible for HC
6096451300O-ring, 5.00 x 1.00 mm, TPU 94 SH
6096451500O-ring 10.00 x 1.00, TPU 94 SH
6096501500O-ring, 25.07 x 2.62 mm, TPU 93 SH
6096520600Seal ring Kantsil DKR 00018-N90, for CAV2R
6096520700Seal ring Kantsil DKAR 00016-N90, for CAV1
6096570200Hat cuff seal, KACO QHWA 20x30x7/8,2VGF01
6096570500KACO cap seal QHWA 16 x 30 x 6/7.5, VGF01
6097521300Seal ring Kantsil FK 447
6952998900Hydraulic power unit HK 489 LD/2
6955842600Hydraulic power pack HKF 489 DT/1-H 2,5-H2,5
6956555200Hydraulic power pack HKF 489 DT/1-Z21
6958276300Pump HC 14 /0,61 -B 1/200-0-11 D-G 24, 3 x 400 V 50 Hz
6958334100Hydraulic power pack HC 14/0,2
6958572500Hydraulic power pack HC24/11-A3/300
6959428800Pump unit HKF 449 DT/1 M-H 6,0
6960100100Hydraulic aggregate 1138186
6961279900Pump unit HKF 435/1
6963004284Pump unit KA 241 SKT/Z 8,8
6963019741Pump unit HK 44 DT/1-Z.5,2-Z11,3 -AP 34-41-G 24-SWR 2 F-G-1-WG 230-AS 3F 2/...BVZP 1 F-E 22/00-1-1-WG 230X 84 Z-9/250, 3 x 400/230 V 50 Hz
6963032393Pump unit HC 14/0,31
6963035238Pump unit HK 24 T/1M-H1,08
6963042868Hydraulic power unit MP 24-Z3,5/B10-B1/110
6963045557Pump unit HK 489 DT60/1-H 2,08, 3 x 400/230 V 50 Hz
6963053630Pump unit HK 33 D/1M-H 0,9 - C5
6963055286Pump unit KA 281 SKD/H 4,14, with motor and housing
6963055315Pump unit HK 33 DT/1-H 1,5
6963055633KA 281 SKDTP/H 1,84, 3x200V 50Hz
6963055870Hydraulic power pack HC 24/1,1-B3/400
6963056366AC 322/.../3 A
6963057564Pump unit HC 24 DT/0,81
6963072867KA 24 S/H 0,47 -A 3/400 -BWH 1 F1-R5R5R5R5-45/2-1-G 24 -X 84 V-9/600, 3 x 400 V 50 Hz
6963084192KA 281 SK/H 3.61-B 1/250-1-11 X, 3x400V 50Hz
6963086598Pump unit KA 24 SK/H 1,51
6963094807Hydraulic power unit HK 439LD/1M-Z9,8
6963095583Hydraulic pump unit KA 2811 SK/H 8,29
6963096358Pump unit HC 24 DT/1,35-C5
6963101804Pump unit HKL 3489 DT/1
6963103157Compact power pack KA 281 SK/H 3.61-B 1/250-1-11 X-X 84 G-9/250, 3x400V 50Hz
6963107462Pump unit KA 241 SKT/Z 8,8
6963120337HC 24/1.1-AB1 K C300R-VB11 FM-NN4/4-1-WGM 110, 3 x 200 V, 50/60 Hz
6963124695Pump unit KA 23 SK/Z 1,1
6963124719Pump unit HC 24/1,1
6963153686Pump unit KA 222 SKS/H 0,91
6963156100Hydraulic power pack HC 22/2,06
7471101200Hydraulic cylinder HSE 24-20
7474101000Hydraulic clamp HSE 24-5
HCCompact Power Pack, Intermittent Service
HKCompact Hydraulic Power Pack, Oil-immersed Motor
HKFCompact Hydraulic Power Pack Variant
KACompact Hydraulic Power Pack, Motor-mounted Pump
MHC0530001Hydraulic cylinder HSA 40-25
NPCCompact Power Pack, DC Motor

HAWE Hydraulik Hydraulic Systems: Common Questions

Yes. Compact, standard, servo and mini power packs integrate pump, motor, reservoir and valve control into one unit, built on HAWE's steel valve-bank and manifold architecture.

Steel valve banks and connection blocks take the high-pressure duty these systems are built for, up to 700 bar depending on the pump element.

The nameplate designation if you are replacing one. For a new build, the pressure and flow, the functions the valve bank has to control, the duty cycle and the supply voltage.

Yes, down to individual valves, pump elements and seal kits. Send the unit's type designation and tell us what failed.